Slide-A-Matic Specifications & Sizes

Table of general Slide-A-Matic gate dimensions and available gate widths

General Dimensions Tall Gate (Inches)
Single Panel Width	51.50
Panel Height	72.25
Anchor and Latch Post Height	76.65
Gap between Latch Post and Gate	1.75
Gap between Anchor Post and Gate	4.00
Gap between bottom of gate and floor	4.40
Total height from floor to top of gate	76.65
Rotation	214 degrees
General Dimensions Short Gate (Inches)
Single Panel Width	51.50
Panel Height	37.60
Anchor and Latch Post Height	42.00
Gap between Latch Post and Gate	1.75
Gap between Anchor Post and Gate	4.00
Gap between bottom of gate and floor	42.00
Total height from floor to top of gate	214 degrees
Gate Widths (Gate only. Excludes Anchor and Latch Posts
6-Panel Gate	236.33-in.
5-Panel Gate	206.93-in.
4-Panel Gate	166.12-in.
3-Panel Gate	136.26-in.
2-Panel Gate	94.63-in.
Gate Widths (Including Anchor and Latch Posts)
6-Panel Gate	246.33-in.
5-Panel Gate	216.93-in.
4-Panel Gate	176.12-in.
3-Panel Gate	146.26-in.
2-Panel Gate	104.63-in.
Gate Thickness (When retracted)
6-Panel Gate	5.88
5-Panel Gate	4.88
4-Panel Gate	3.88
3-Panel Gate	2.88
2-Panel Gate	1.88

Anchor and Latch Post
Posts are 2-in. heavy-duty steel square tube, capped.
Foot Plates are 3/4-in. CRS and 4-hole drilled.

Vertical Slide Latch
3/4-inch hardened steel, pad-lockable. Latch can be accessed from either side of gate.

Casters
3-inch, swivel, non-marking with 175-lb. capacity each.

Wire Inserts
.120 welded wire on 2-inch centers (square).
Expanded metal 1/2 #20 flattened (65% open area).
Expanded metal 1/2 #18 flattened (65% open area).

Color (Premium Powdercoat)
Safety yellow standard. Also available with black inserts.
Other colors available.

Installation Instructions
“Step-by-step” installation drawings are supplied relevant to each purchase configuration. Installation is quick and easy.

Warranty
The Slide-A-Matic warranty is for a period of 1-year and covers replacement of any defective parts. Labor is not included.